Woodworking For The Rest Of Us
This is written for woodworking "for the
rest of us". This is not The New
Yankee Workshop . I (personally) don't have the 2,000 square feet of
garage space floor space and several thousands of dollars to spend for nice
woodworking equipment.
Not to disparage The New Yankee Workshop
I do love to watch that show.
Norm Abram does Wonderful things
with wood. It just reminds me of the old joke comparing cooking with
recipes to Science Fiction that ends with "Yeah, like that's going to
happen". This is woodworking for rank amateurs. Those of you that
are more experienced can stop laughing now. I work in
technology for a living, not Gardening Structures :-). I had fun with this
and built solid structures that won't fall apart any time soon.
I have seen the free construction plans for
gardening structures scattered around the Internet. I am
impressed. But after looking at most of them I won't be doing these
plans any time soon either. Some seem a tad complicated to me, others did
not fit the need I had. None had any helpful hints or instructions on how
to build thier complicated designs. For example almost all the cold frames used
wooden windows and hinges to attach the windows. In the summer those windows
can get in the way or if the frame is metal the hinges can be hard to attach.
The frame plans below do not have hinges, the windows are removable. I also
try very hard to allow some room for slop when putting together the projects.
I am not exactly perfect when cutting everything The boards that I have to
work with are not always flat and straight. I also have included instructions
and helpful hints on how I built the items (as much as I can remember).
It started with an old deck that was 18 feet by 24 feet.
I am sure that the deck (at one time) looked fine, but the person that built the deck
used standard nails instead of decking screws and (as far as I could tell) had
never applied any kind of protection to the surface. Whoever built the deck also
used cheap pine boards (lots of knots). In addition the deck was built far away
from the house, pretty useless for a deck. It was, however, a perfect place for a garden
for Rose.
But this page is not how to build a deck
, this is how to use the wood from a deck that you don't want (or any other structure that
you don't need). The boards did look like they may have been treated wood.
If your boards are treated with Chromated copper arsenate (CCA) PLEASE be
very careful. Do NOT use CCA treated wood for compost bins or any structure that
will be in contact with food. Use untreated wood for these structures and use
a Treated
Wood Alternative. Data has shown that CCA
treated wood is not as safe as previously thought. The USDA Forest Service
Forest Products Laboratory
has a most excellent Wood Handbook
on everything you ever wanted to know about wood. There are many many more publications available.
I tore down the deck, removed the nails, and ended up with a stack of wood
about 3 feet wide, three feet high and 12 feet long. The stack consisted
of different sizes and lengths of wood.
Throw in a window and sliding glass door replacement (keeping the old
windows and the old sliding glass door) and you have the material for a large
and a small cold frame.
For her garden Rose needed a few structures. We first discussed a compost bin and what
her specifications / requirements were. A good book to look at is
Rodale's Illustrated Encyclopedia of Gardening and Landscaping Techniques
by
Barbara Ellis. I do not have any monetary interest in this book, it is just a very good book.
When I started building my projects I learned some things about simple
carpentry:
1) Wood Is Not The Size They say it is
2) The right tools are important, and they really
don't cost that much
3) Technique, a few hints and tricks help make the
job go easier.
Now for the projects. I have tried to list them in level of complexity:
- Bird Platform Feeder
- Cold Frame, Small
- Cold Frame, Large
- Outside Seedling Shelves
- Worm Bin
- Bar-B-Q Table
- Compost Bin
- Potting Bench
- Potting Shed
- Rabbit and Deer Proof Enclosure
Rev 20230909